Job Responsibilities:

1) Complete the quotation for new projects and realize the introduction of new products;

2) Complete the process evaluation of the project;

3) Responsible for the process development and confirmation of special components;

4) Lead the improvement work at all stages of product production;

5) Product production workshop, process layout and standard working hours measurement optimization;

6) Support the cause analysis and resolution of non-conformities and abnormal problems in production, engineering, etc.;

7) Record and improve problem points and customer complaints; 8) Complete other tasks assigned by the leader.

Job Requirements:

1) More than 2 years of working experience in the electronics manufacturing industry;

2) Familiar with and master the design and optimization of each manufacturing process;

3) Proficiency in using CAD, CAM, office software;

Those who have certain knowledge of circuit analysis are preferred.

Job Responsibilities:

1) EMS RFQ/NPI processing BOM and EQ and system establishment;

2) Assist Sourcer in confirming the specifications of replacement materials for discontinued materials in the inquiry;

3) Inspection and verification of sample materials at the sample stage;

4) Confirmation of drawing/BOM in sample trial-making stage; 5) Follow up proofing and solve problems in sample making;

6) Responsible for parts recognition and FA confirmation, special inspection point marking (non-standard);

7) ECR/ECN/ECT processing;

8) Support the cause analysis and resolution of non-conformities and abnormal problems in production, engineering, etc.;

9) Complete other tasks assigned by the leader.

Job Requirements:

1) More than 2 years of relevant job experience; 2) Proficiency in using software tools such as Dxp, Cam350, and office;

Familiar with the manufacturing process of EMS engineering products to understand the identification and electrical parameters of electronic devices.

Assertively deliver seamless technology through holistic convergence. Phosfluorescently communicate unique imperatives before

Job Responsibilities:

1) Responsible for the evaluation, introduction, installation, and acceptance of new customers or new test programs;

2) Responsible for evaluating and developing some new product test plans;

3) Responsible for the management and maintenance of production test equipment and test tooling;

4) Responsible for the continuous optimization and innovative improvement of product testing programs;

5) Responsible for personnel training and other related work;

6) Deal with daily test problems and ensure the normal production of products;

7) Complete other tasks assigned by the leader.

Job Requirements:

1) More than 1 year of test hardware development or more than 2 years of relevant work experience as a test engineer;

2) Have Labview, C language (equivalent) related embedded programming foundation;

3) Proficiency in using software tools such as Altium, Cam350, and office;

4) Have a certain foundation of analog and digital electronic circuits, and be proficient in using measuring tools such as oscilloscopes and multimeters;

5) No obstacles to color recognition;

6) College degree or above, major in electronic information, communication engineering, electrical automation, computer, etc.;

Proficient in AVR or 51 single-chip microcomputer (equivalent or above), able to use one type of product testing and development, and proficient in using ICT (MDA) testing equipment of German brands and other brands is preferred.

Job Responsibilities:

1) Responsible for organizing and evaluating the introduction, installation, acceptance and asset management of new SMT testing equipment/tooling;

2) Responsible for the management and maintenance of production SMT inspection equipment (AOI, FCT) tooling;

3) Responsible for programming, debugging, continuous improvement and change management of SMT testing equipment;

4) Handle the test procedures and test tooling and equipment abnormalities in time to ensure the normal production of mass-produced products;

5) Responsible for the training and safe operation management of operators who produce SMT testing equipment;

6) Responsible for workshop MES system maintenance and daily problem handling;

7) Complete other tasks assigned by the leader.

Job Requirements:

1) More than 1 year experience in AOI/SPI related programming and equipment operation;

2) Proficient in the basic knowledge of various electronic components and testing and debugging solutions for devices and welding effects;

3) Proficiency in using software tools such as Cam350, office, etc., with a certain foundation in analog and digital electronics;

4) Proficiency in programming, maintenance, operation and maintenance of AOI/SPI equipment from related brands such as Telekom, Heli, Stech, etc., as well as Meizhute FCT equipment is preferred;

5) College degree or above, majoring in electronic information, communication engineering, electrical automation, computer, etc.

Job Responsibilities:

1) Responsible for leading the quality related work and data statistical analysis of the new project stage;

2) Responsible for the analysis and improvement of the company's internal quality abnormalities;

3) Responsible for the formulation of the company's internal quality inspection standards;

4) Responsible for coordinating the quality communication between the company and customers and handling abnormal situations reported by customers;

5) Responsible for the continuous improvement of product quality, formulating corresponding improvement plans, and supervising and tracking the progress of the plan; 6) Complete other tasks assigned by the leader.

Job Requirements:

1) More than two years of work experience in electronics manufacturing;

2) Familiar with PCB and PCBA inspection standards;

3) Understand the relevant content of the 8D report, and output the 8D report;

4) Familiar with the system and related knowledge of quality statistics;

5) Proficiency in using office software;

6) Have good communication and coordination skills and strong learning ability;

7) Computer/electronics related majors are preferred.

Job Responsibilities:

1) Promote suppliers to implement SQM system procedures and improve internal quality problems;

2) Responsible for supplier review, evaluation management and monitoring;

3) Formulate incoming materials inspection standards and document them, and be responsible for training, supervision and management;

4) Responsible for the establishment of IQC quality assurance system;

5) Responsible for handling and communicating supplier unqualified materials;

6) Complete other tasks assigned by the leader.

Job Requirements:

1) Bachelor degree or above, more than three years of work experience in the same position;

2) Proficiency in using office software;

3) Understand the ISO9001\IATF16949 system;

4) Have strong communication and organization skills;

Those who understand the SMT industry and are familiar with autoCAD are preferred;

Job Responsibilities:

1) Participate in the implementation of the project's MES system, and cooperate with the project manager and MES technical consultant to complete various tasks;

2) Responsible for the functional unit test of each module, analyze the test results, and feed back to the technical consultant;

3) Participate in project demand research, system design, review research demand report and system design report;

4) Project maintenance and technical support;

5) Responsible for the system maintenance and problem solving of the normal operation of the MES system;

6) Obey the task arrangement of the immediate superior, and report the work progress and work trend to the superior in a timely manner;

7) Complete other tasks assigned by the leader.

Job Requirements:

1) Proficiency in the use of C# language for program development and debugging;

2) Proficient in SQL Server database;

3) More than 1 year of work experience in IT industry or related fields;

4) Understand the knowledge of network integration system, Windows operating system, network security, data storage, etc.;

5) Experience in MES system design and maintenance of manufacturing enterprises is preferred;

6) Proficiency in using office and other office software; 7) Bachelor degree or above, major in electronics or computer;

Strong communication skills, organization and coordination skills, analysis and problem-solving skills, and teamwork skills.

Job Responsibilities:

1) Product quotation: Receive customer information and initiate a workflow on OA. After the quotation is completed, analyze the quotation data and improve the data that does not meet the standard;

2) Order management: receiving customer orders and order entry. The internal organization initiates purchase suggestions, follows up the complete set of materials information, and arranges production and delivery together with the production plan. Perform system invoicing and follow up the payment data;

3) Gross profit management: Regularly analyze and improve the gross profit of the responsible project to ensure the competitiveness of the project;

4) Trial production of new products: receive small batch orders of samples from customers, organize internal personnel to conduct trial production, and conduct trial production summary;

5) Customer complaint handling: receiving customer complaints, organizing internal personnel to respond to customer complaint reports, and follow up on the improvement of internal customer complaints;

6) Relevant work of overseas companies: organize weekly meetings with overseas companies, and cooperate with overseas companies to complete project-related work; 7) Complete other tasks assigned by the leader.

Job Requirements:

1) Have more than 3 years of project management experience, familiar with EMS production and manufacturing related processes, and familiar with PCBA and assembly related processes;

2) Outgoing, cheerful and enthusiastic. Strong sense of responsibility, carefulness, patience, and a good sense of teamwork;

3) Fluent in English reading and writing or overseas project experience is preferred.

Job Responsibilities:

1) According to sales forecasts and customer orders, reasonably formulate and execute production plans, ensure quality and quantity, complete production tasks on time, and meet customer needs;

2) Complete the production efficiency improvement goals set by the company/department;

3) Responsible for analyzing material loss data, formulating relevant methods, ensuring material loss control rate, and achieving the company's material loss target;

4) Promote and improve the quality of the project, reduce quality risks, and reduce quality costs;

5) Personnel management within the jurisdiction and team building work;

6) Complete other tasks assigned by the leader.

Job Requirements:

1) More than 5 years of experience in large-scale factory management, familiar with EMS manufacturing related processes;

2) Have strong communication and expression, organization and coordination, and internal promotion capabilities;

3) Familiar with PCBA processing and assembly related processes;

4) Have a strong sense of responsibility, ability to withstand stress, and a cheerful and enthusiastic personality.